DEPTH SAND FILTER

1 - General

Side Mount Sand Filter

Color:

 
Sightglass
Manual Air Purge Manhole
Collector Arms Nozzle Plate
   
   

2 - Product Information

high performance vertical bobbin wound filters are manufactured using reinforced polyester with glass fibre, which is completely anti-corrosive, with high mechanical, chemical and thermal resistance. One of its main characteristics is the height of its filtering layer. dirt is driven through the sand bed and trapped in minute spaces between the particles of sand. Initially, a clean bed will remove larger particles and then as the sand bed starts to load up, it will remove finer particles. The higher this is, the better its performance.

3 - Technical Data

Model Diameter
mm		 Height
mm		 Outlet
mm		 Filer area
m²		 Design flow
m³/h		 Sand WT.*
kg
HK15800 800 1500 63 0.5 15 470
HK15900 900 1500 63 0.64 19.20 590
HK151000 1000 1500 63 0.79 23.70 729
HK151200 1200 1500 90 1.13 33.90 842
HK20800 800 2000 63 0.5 15 811
HK20900 900 2000 63 0.64 19.20 1035
HK201000 1000 2000 63 0.79 23.70 1280
HK201200 1200 2000 90 1.13 33.90 1634
HK15800A 800 1500 50 0.5 15 470
HK15900A 900 1500 50 0.64 19.20 590
HK151000A 1000 1500 50 0.79 23.70 729
HK20800A 800 2000 50 0.5 15 811
HK20900A 900 2000 50 0.64 19.20 1035
HK201000A 1000 2000 50 0.79 23.70 1280

*Use only #20 white silica sand, size range 0.4-0.55mm.
NOTE: Maximum working pressure: 4kg/cm²; maximum temperature: 50°C(122°F)